Learn how to sew on badges manually or by machine

If you want to decorate a piece of clothing, accessory, luggage piece or even hats you could sew on badges to have the fresh look easily. Badges or patches when placed strategically can immediately alter the look of a garment or accessory and take it from boring to spunky within just a few minutes. Should you have children and they keep earning badges of merit dogbadge.com you would like to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy once you know the right way to get it done.

To do this procedure of sewing on a badge, begin with placing the badge over the place where you want it. Now secure the badge well with a few pins so it stays into position and doesn’t shift when you’re sewing it on. If you happen to be putting the patch over a garment, you need to fix the patch after which try the garment on to make sure that the patch or the badge looks most suitable in the place. If the patch requires a little readjustment you can accomplish it at this time easily.

Now thread the needle being sure that the thread that you are currently using isn’t too long. Keep your thread within a length of approximately 18inches for simple maneuvering. In case your thread is simply too long then you might get bothered by knots. When you have the thread ready make a knot at the end of the thread. You could thread a needle yourself by holding the non knotted end between your forefinger and thumb after which passing it via the eye of your needle. You may also consider the aid of a needle threader if you find threading a needle in this way difficult.

Pass the needle in the badge as well as the fabric ensuring that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you commenced stitching keeping this distance from the last stitch all the time. Continue stitching surrounding the entire perimeter of the badge until you have finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by way of a single stitch. Pull the thread securely to secure the knot after which cut-off any excess thread which is left. Lastly remove extra safety pins that you were using to secure the patch in place.

It’s also possible to sew on badges with the assistance of a sewing machine if you don’t want to do the same by hand. Pick a thread that matched the color of the patch after which tread your machine. It’s also possible to pick a contrasting color depending on the look that you want to present your badge. Once this is successfully done you should start sewing you badge. Utilize the surface of the badge as your starting point and sew all across the edge of your badge making use of the regular stitch mode ending at your starting position. Once done, cut any additional thread that connects the badge to the machine and your garment is ready for use together with the badge.